-
-
IPC-7711/21C- English (PDF)
Electronics Assembly Standards €350,00 Add to cartRework, Modification and Repair of Electronic Assemblies
-
IPC-A-610H – English (Hardcopy)
Electronics Assembly Standards €330,00 Add to cartAcceptability of Electronic Assemblies
-
IPC-7711/21D- English (PDF)
Electronics Assembly Standards €352,00 Add to cartRework, Modification and Repair of Electronic Assemblies
-
IPC-J-STD-001H – English (PDF)
Electronics Assembly Standards €205,00 Add to cartRequirements for Soldered Electrical and Electronic Assemblies
-
IPC/WHMA-A-620 Rev D/E Hands-On Cable Kit
Cable Assembly Read moreThis official IPC/WHMA-A-620 Rev D/E Hands-On Cable Kit includes all parts needed to train and practice wire-and-cable harness building skills. Meets IPC/WHMA-A-620 Revision D/E Hands-On Module requirements for classroom certification.
Ideal for certification, recertification, hands-on practice, or even challenge tests to evaluate skills under realistic conditions.This kit enables hands-on training in:
- Cable & wire dimensioning, tolerances & preparation
- Crimp terminations
- Soldered terminations
- Splices & branch-offs
- Connectorization (housings & pins)
- Coaxial cable assembly
- Wire bundle routing & securing, shielding & strain relief
Each kit is individually packaged and all components are bagged and tagged for easy identification and fast lesson setup.
The IPC/WHMA-A-620 Rev D/E Hands-On Cable Kit contains the following materials:
(1) 7.3m Wire, stranded, 22AWG
(1) D-Sub Connector 9 pos
(1) D-Sub Connector 15 pos, Cup
(8) Contact Pin 24-20 AWG Crimp
(4) Ring Lug Crimp
(1) Turret Terminal
(1) Hook Terminal
(1) Backshell and Hardware 9 pos Connector
(1) Backshell and Hardware 15 pos Connector
(2) Open Barrel Contact
(22) Cable Ties White
(1) Cable Tie Black
(6) Marker Plates
(1) 20 cm Sleeving Braid
(2) Shrink Tubing 1/8″ 8cm
(2) Shrink Tubing 1/4″ 4cm
(1) Shrink Tubing 3/8″ 8cm
(6) Extra item: printed labels
(1) Coax Cable 240cm
(1) BNC Coax Connector
(1) TNC Coax ConnectorGlass Cloth Tape, 1″ wide, silicone PSA 1′
Solder Wire, .020″, ROL0 Rosin core 3′
Kester 185 liquid soldering flux, ROL0 2ml -
IPC/WHMA-A-620 Military & Space Chassis
IPC/WHMA-A-620 €549,00 Add to cartThe IPC/WHMA-A-620 Military and Space Chassis is the official chassis required for the Military and Space Addendum training course. Built specifically to meet IPC standards, this chassis comes fully prepared with all holes, cutouts, and connectors already integrated, so you can start your training without additional modifications.
One of its key advantages is reusability – the chassis is designed for repeated use in multiple training sessions, making it a reliable and cost-effective solution for certified training environments. By using the official chassis, you ensure that your training aligns with IPC/WHMA-A-620 Military and Space Addendum requirements and provides the most accurate, hands-on learning experience possible.
Contains the following materials:
(1) Aluminium Chassis 5x10x17 in, welded, natural, AC series
(1) Barrier Strip | 4 Dual Barrier Wire-to-Wire 9.53 mm
(1) BNC Coaxial Connector Bulkhead
(1) TNC Coaxial Connector Bulkhead
(1) D-Sub socket, 15 pos. Bulkhead
(1) Cicular Conn RCPT, 10-5, wall mount; Military Specification:MIL-DTL-83723 Series III
(1) Conn MIL-DTL-26482 Circular SKT 12 POS Crimp ST Wall Mount 12 Terminal 1 Port -
IPC/WHMA-A-620E Military and Space Addendum Cable Kit
IPC/WHMA-A-620 €849,50 Add to cartContact us for shipping estimate – MADE ON DEMAND
IPC/WHMA-A-620E Military and Space Cable Training Kit (Parts Only)
This official Military and Space Cable Parts Only Kit includes all the components required to train and certify students in the hands-on portion of the IPC/WHMA-A-620 Space Addendum. It fully meets the module requirements for classroom certification.
Includes the specialized materials and components needed to practice the higher-reliability assembly, inspection and acceptance techniques required for military and aerospace wiring. Ideal for certification, recertification, hands-on practice, or challenge tests to evaluate skills under realistic conditions.
Hands-On Training Covers:
- Cable and wire dimensioning & tolerances
- Wire preparation
- Crimp and soldered terminations
- IDC connections, pick-offs, and splices
- Connectorization, sleeving, shielding, and marking
- Coaxial cable assembly
- Wire bundle securing and final installation
Each kit is individually packaged with all components bagged and labeled for easy identification.
Perfect for classroom training. Tools and manuals sold separately.
This IPC/WHMA-A-620E Military and Space Cable Training Kit (Parts Only) contains the following items:
(1) Wire, 22AWG stranded White, 19 meters
(1) Wire 18AWG stranded Green, 0,8 meter
(1) Cable 22-2 2 core screened, 1,6 meter
(1) Cable 18-3 3 core screened, 1,6 meter
(1) Cable Coaxial RG 58, 0,8 meter
(1) Solder Wire Sn60Pb40 0.7mm, 1 meter
(1) Solder Wire Sn60Pb40 0.5mm, 1 meter
(1) P3 Conn. D-Sub IDC 9 Pos.
(1) P6 Conn D Sub Solder Cup
(3) Contacts, Pin Crimp 20-16 Awg
(13) Contacts, Pin Crimp 20-16 Awg
(1) P1 Connector Circular 5 Pos.
(1) J5 Connector, Hybrid D-Sub
(1) P11 Connector Coaxial TNC
(1) P9 Connector Coaxial BNC
(1) P6 Backshell Conn.& assc
(1) P1 Backshell Circ. 90˚ Size 10
(55) Cable Tie 6” Natural
(10) Marker Plate ,0.75”H x 1.52 W
(10) Label Kit
(1) P2 Backshell Circ. 90˚ Size 14
(3) J5 Contacts Solder Cup 10A Power
(2) Insertion/extraction Tools
(1) Sheild,Braid ¼”Dia 10Awg, 0,8 meter
(1) Fabric Braid Sleeving ¼” Dia Nylon, 1 meter
(1) Fabric Braid Sleeving1/2” Dia Nylon, 1 meter
(4) Solder Sleeve W/O Grnd Wire size 3
(3) Solder Sleeve W/O Grnd Wire size 5
(1) Ring Lug # 4 Uninsulated 16-22 Awg
(8) Ring Lug# 6 Crimp 16-22 Awg
(1) Butt Splice Terminal Crimp 16-22 Awg
(1) P2 Connector Circular Size 14
(1) Glass Cloth Tape 1” Width silicone PSA, 0,3 meter
(1) Uncoated Cloth Tape 1” width Rubber PSA, 1 meter
(1) Lacing Cord Size 3, 3 meter
(1) Shrink Tubing, Kynar 3/64” Dia, 0,3 meter
(1) Shrink Tubing, Kynar 3/8” Dia, 0,3 meter
(1) Shrink Tubing, Kynar 1/4” Dia, 0,3 meter
(1) Shrink Tubing, Kynar 3/16” Dia, 0,3 meter
(1) Shrink Tubing Viton 5/8” Dia, 0,2 meter -
J-STD-001 Soldering Certification Training Kit
J-STD-001 €42,50 Add to cartThis officially recognized J-STD-001 training kit (Revision E and prior) is designed for both operator and instructor certification. Supplied in lead-free format, it includes a wide range of components for evaluating and testing students during initial certification as well as recertification. Each kit provides enough materials for both a practice board and a final board or can be shared by two people for recertification.
Contains the following materials (lead free):
(2) Lead Free Boards
(4) 1/4 Watt Axial Resistors
(4) T05 Transistors
(4) Transistor Standoffs
(4) Axial Diodes
(4) CKO6 Capacitors
(4) Capacitor Standoffs
(4) 16 Pin DIPs
(4) 0201 Resistors
(4) 0805 Resistors
(4) 1206 Resistors
(4) 1206 Capacitors
(4) 1206 MELF Diodes
(2) SOIC 14 IC Package
(2) QFP 100 IC Package
(2) PLCC 20 IC Package
(2) Turret Terminal
(2) Pierced Terminal
(2) Bifurcated Terminal
(2) Cup Terminal
100cm Red – 22 AWG wire
30cm Black – 20 AWG wire -
IPC-7711/7721 Rev “D” Advanced Rework and Repair Training Kit
IPC 7711/7721 €94,50 Add to cartThis official IPC-7711/7721 Revision D Advanced Rework and Repair Kit provides everything you need to practice and perfect advanced rework, repair, and modification techniques. Ideal for certification, recertification, hands-on practice, or even challenge tests to evaluate skills under realistic conditions.
Why Choose This Kit:
- Fully compliant with IPC-7711/7721 Revision C and/or D Training courses
- Realistic repair challenges: inner- & multi-layer repairs, conformal coating, damaged traces, and staked components
- Includes a wide range of SMT and Through-Hole components, from 0201 resistors to tantalum capacitors
- Comes with a fully assembled lead-free board. Tin/lead option available
- All components individually bagged and labeled for easy use
Kit Highlights:
- 1 fully assembled board
- Components to repopulate after removal
- Variety of pads, traces, and plated-through holes for advanced circuit and laminate repair
- Ideal for both beginner and advanced training, including challenge tests
In stock and ready to ship – order now and start hands-on IPC practice today!
Contains the following materials (lead free):
(1) 7711/21 Rev PCBA (Assembled Board)
(2) LQFP100
(2) LQFP44
(4) PLCC28
(4) SOT23
(10) 0201 Resistors
(10) 0402 Resistors
(8) 0603 Capacitors
(6) 1206 Resistors
(6) 1206 MELF
(4) SOIC14
(4) DPAK
(6) 1/4 W Axial Resistor
(6) CK05
(4) DIP16
(4)TO5/39 -
field effect transistor (FET)
ESD €3,20 Add to cartThe FET is an essential accessory for the ESD-Demoboard.
Pack Unit (P.U.): 20 pieces -
ESD-demoboard
ESD €76,75 Add to cartThe ESD Demo Board is an ideal tool for seminars and training sessions, allowing you to visually and audibly demonstrate ESD damage to sensitive electronic components. Highlight the importance of proper grounding and leave a lasting impression on your audience.
Includes:
- ESD Demo Board
- 9V battery
- Manual
- 20 replacement transistors (FET) – use only for optimal performance
Shopping Cart